Table of Contents
Advertisement
9.2
Functional test
Trolleys
Carefully move the trolley to the end positions and check the positions of the end stops.
10
Maintenance
10.1
General
All monitoring, servicing and maintenance operations are to ensure correct functioning of the equipment;
they must be effected with utmost care.
Only "qualified persons" may do this work.
Servicing and maintenance work must only be done when the hoist is not loaded.
Records must be kept of all test results and measures taken.
10.2
Monitoring
The monitoring and servicing intervals stated are valid for operation under normal conditions and single-shift
operation. In case of severe operating conditions (e.g. frequent operation with full load) or special
environmental conditions (e.g., heat, dust, etc.), the intervals must be shortened correspondingly
11
Inspection
11.1
Periodic checks
Independently from the regulations of the individual countries, lifting devices must be checked at least yearly
by a qualified person or licensed qualified person regarding its functional safety.
check screw connections
check the bearings
check the trolley wheels
check lubrication of the driving pinion
buffers - check correct position and wear
electric motor* - check the brake lining
electric motor* - check the brake
pneumatic motor*
Have the equipment checked by an expert
(periodic inspection)
*as far as applicable
12
Service
Maintenance must be effected by lubricating the driving pinions (for hand geared trolleys) and by checking
the rubber end stops.
12.1
Lubricant - Selection
FUCHS
SHELL
Renolit FEP 2
Alvania EP 2
Stabylan 5006
--
--
--
12.2
Lubricant for food industry – Selection (as option*)
SHELL
Gearing
FM Grease HD2
Load chain
--
Load hook;
Pulleys
FM Grease HD2
Gear rim;
Drive pinion
* must be mentioned by order
10
at
commissioning
X
X
X
X
X
ESSO
MOBIL
Unirex EP 2
Mobilux EP 2
--
--
--
--
Chain lubricant OKS 451
MOBIL
Mobilgrease FM 222
Optimol Viscoleb 1500
Lubricant FM 100
Mobilgrease FM 222
daily
1st maintenance
checks
after
3 months
X
X
TOTAL
CASTROL
MULTIS EP2
--
--
Optimol Viscoleb 1500
--
--
KLÜBER
CASTROL
--
Klüberoil 4UH 1-1500 N
--
--
--
Inspection
Inspection
Maintenance
Maintenance
every
every
3 months
12 months
X
X
X
X
X
X
X
X
KLÜBER
--
Klüberoil 4UH 1-1500
Wolfracoat 99113
5.52.122.00.01.02
Advertisement
Table of Contents
