Related Manuals for HADEF 53/07A
Summary of Contents for HADEF 53/07A
- Page 1 Installation,- Operating and Maintenance Instructions HADEF Ratchet Lever Hoist Type 53/07 + 53/07A 5.52.187.00.01.09 Rev.09...
-
Page 2: Table Of Contents
Heinrich de Fries GmbH Heinrich de Fries GmbH, Gauss Str. 20, D-40235 Düsseldorf Heinrich De Fries GmbH will be named HADEF in the following text. Original operating- and maintenance instructions in German language. Translation in other languages is made of the German original. -
Page 3: Information
Inspection ..................13 11.1 Periodic checks ......................13 11.2 Checking the load chain ....................13 11.3 Checking the load hook ....................14 11.4 Checking - pawl ......................14 11.5 Checking – Brake System ..................... 15 11.6 Checking – Suspension and load hook bolt ..............15 Service ..................... -
Page 4: Duty Of Care Of The Owner
Failure to follow the instructions of this manual can lead to unpredictable hazards. For any resulting damage or personal injury, HADEF assumes no liability. The unit was designed and built following a risk analysis and careful selection of the harmonized standards that are to be complied with, as well as other technical specifications. -
Page 5: Appropriate Use
DANGER! In order to avoid severe injury, please pay attention to the following when using the equipment: Use protective clothes/equipment. Do not wear long hair hanging down open. Do not wear rings or other jewelry. Do not wear clothes that are too big/wide. ... - Page 6 The equipment is to be used exclusively for movement of goods. Under no circumstances my persons be moved. Never load the devices beyond their working load limit. Pay attention to the accident prevention regulations (UVV). Should the hoist be used outside of Germany, please pay attention to the national regulations that apply. ...
-
Page 7: Transport And Storage
Ambient temperature -20°C up to +50°C. Power-operated units -20 up to +40°C. Humidity 100 % or less but not under water DANGER! It is not permitted to use the unit in an area at risk from explosion! Design HADEF ratchet lever hoists are compact hoists with suspension hook for stationary use. Illustration 2 5.52.187.00.01.09... -
Page 8: Functions
Functions The load is lifted, lowered or tensioned by operating the lever. The load pressure brake prevents automatic lowering of the load. NOTICE! If used "overhead" or "lashing" undefined forces may appear. We recommend to use a hoist with slipping clutch for these cases. NOTICE! The best protection against functional failures in case of extreme environmental impact is the regular use of the equipment. -
Page 9: Main Dimensions
Main dimensions Capacity in kg Dimensions 1500 3000 1000 1600 2500 3200 6300 9000 100,5 34,5 35,5 42,5 35,5 42,5 42,5 55,5 62,5 68,5 68,5 21,5 24,5 24,5 41,5 24,5 28,5 26,5 36,5 72,5 Illustration 5 Installation Please observe the following points in order to avoid any damage to equipment or injury of person: ... -
Page 10: Devices From 800 Kg Up To 9000 Kg
Turn the free-wheeling mechanism anti- clockwise, if necessary pull the loose fall of the chain jerkily. The chain can be pulled through in both directions. Illustration 8 Switching OFF the free-wheeling mechanism Turn the free-wheeling mechanism clockwise, if necessary pull the chain fall jerkily. -
Page 11: Brake And Pawl
C Switch OFF the free-wheeling. Switching OFF the free-wheeling mechanism D free-wheeling OFF Turn the free-wheeling wheel with one hand in direction ◄ and pull the load chain at the same time. Free-wheeling wheel turns back to position OFF. -
Page 12: Load Chain
Load chain Before commissioning the load chain must be aligned and oiled. For the first commissioning of motorized hoists, chain oil is supplied with the delivery. Move safety note and fixing wire away from the chain. CAUTION! Do not use grease for lubrication of load chain. -
Page 13: Inspection
Inspection 11.1 Periodic checks Independently from the regulations of the individual countries, lifting devices must be checked at least yearly by a qualified person or licensed qualified person regarding its functional safety. 11.1.1 Components to be checked The following must be checked: ... -
Page 14: Checking The Load Hook
Y = measured length from hook no. 6 H = thickness of hook saddle Illustration 17 Please fill in the Dimensions for load and suspension hooks measured values before Dimension 53/07A commissioning: 1500 3000 Capacity X or Y 21/35,5 24,5/42... -
Page 15: Checking - Brake System
11.5 Checking – Brake System Ratchet wheel (A) and brake linings (B) 2x B 1500-3000 Ratchet wheel (A) with brake linings 1000 1600 2500 3200 6300 9000 11.6 Checking – Suspension and load hook bolt Type Suspension bolt Load hook bolt 11,1 6,89 1500-3000... -
Page 16: Pulleys
Recommendation Interval oil for example: FUCHS RENOLIN PG 220 or special chain lubricant Load chain 0,2 l 3 month Use NO grease! CAUTION! Do not use grease for lubrication of load chain. Without lubrication, manufacturer's warranty and/or liability will be void. 12.2 Pulleys Recommendation... -
Page 17: Lubricant - Selection
12.6 Lubricant - Selection FUCHS SHELL ESSO MOBIL TOTAL CASTROL KLÜBER Renolit FEP 2 Alvania EP 2 Unirex EP 2 Mobilux EP 2 MULTIS EP2 Stabylan 5006 Optimol Viscoleb 1500 Klüberoil 4UH 1-1500 Wolfracoat 99113 Chain lubricant OKS 451 12.7 Lubricant for food industry –... -
Page 18: Remedy
Remedy Check the ratchet lever hoist by listening to the noise it makes: Lifting: Move the lever forward and backwards - it should make click Lowering: Only move the lever backwards not forward - it should make click Problem Cause Remedy Overload Reduce the load to nominal load... -
Page 19: Documents Available On Request
Documents available on request Installation instruction – brake system These works may only be done by „qualified persons“. 5.52.187.00.01.09...