Table of Contents
Advertisement
SUPERSERVER 1028R-WMR(T) User's Manual
1-2
Serverboard Features
At the heart of the 1028R-WMR(T) SuperServer is the X10DRW-E(T), a dual
processor serverboard based on the Intel C612 Express chipset. Below are the main
features of the system (See Figure 1-1 for a chipset block diagram).
Processors
The serverboard supports dual Intel E5-2600 (V3) processors ( LGA 2011 Socket v3).
Each processor supports dual full-width Intel QuickPath Interconnect (QPI) links of
up to 9.6 GT/s one direction per QPI. Refer to the serverboard description pages
on the Supermicro web site for a complete listing of supported processors.
Memory
The integrated memory controller supports up to 1024 GB of Load Reduced
(LRDIMM), and up to 512 GB of Registered (RDIMM) DDR4 (288-pin) ECC
2133/1866/1600 MHz memory in sixteen slots, two DIMMs per channel. Modules
of the same size and speed are recommended. See Chapter 5 for details.
Serial ATA
The server supports two internal hard drives. The serverboard offers ten SATA 3.0
connectors (I-SATA 0-3, S-SATA0-3, I-SATA4/5 for SATADOM), and two can be
used in this system.
PCI Expansion Slots
The serverboard has one PCI-Express 3.0 x32 slot. The system supports two
expansion cards by means of a riser card.
Input/Output Ports
The rear I/O ports include two Ethernet LAN ports, one dedicated IPMI LAN port,
four USB 2.0 ports, and a VGA (monitor) port. The LAN ports are:
•
For 1028R-WMR model, two 1 Gb ports
•
For 1028R-WMRT model, two 10 Gb ports
Internal headers include two USB 3.0 ports and one COM port.
The rear I/O panel also includes a UID switch and LED.
1-2
Advertisement
Table of Contents
