Lenovo 30A0 Hardware Maintenance Manual page 174

12. Install the two screws to secure the mSATA solid-state drive to the storage converter.
Figure 122. Installing the screws that secure the mSATA solid state drive
13. Insert the mSATA solid-state drive storage converter to the chassis and push the converter to the left to
align the screw hole in the converter with the corresponding hole in the chassis. Then install the screw
to secure the mSATA solid-state drive storage converter to the chassis.
Figure 123. Installing the mSATA solid-state drive
14. Connect the signal cable and the power cable to the mSATA solid-state drive.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 216.
168
ThinkStation E32 Hardware Maintenance Manual