5. Depending on whether you are installing a tertiary 3.5-inch hard disk drive or a 2.5-inch solid state
drive, do one of the following:
• Install the hard disk drive into the 5.25-inch optical drive bracket. Then, fully tighten the four screws
to secure the hard disk drive to the 5.25-inch optical drive bracket.
Figure 65. Installing the tertiary hard disk drive
• Install the solid state drive into the 5.25-inch optical drive bracket. To install the solid state drive into
the 5.25-inch optical drive bracket, do the following:
128
ThinkStation E32 Hardware Maintenance Manual