Lenovo 30A0 Hardware Maintenance Manual page 119

10. Install the two screws to secure the mSATA solid-state drive to the storage converter.
Figure 47. Installing the screws that secure the mSATA solid-state drive
11. Slide the mSATA solid-state drive storage converter into the card reader drive bay until it snaps into
position.
Figure 48. Installing the mSATA solid-state drive
12. Connect the signal cable and the power cable to the mSATA solid-state drive.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 147.
.
Chapter 10 Replacing FRUs (machine types: 30A0 and 30A1)
113