Maintenance
4. While pushing the clip (2), pull down
the wiper blade (3). Remove the wiper
blade from the wiper arm.
2C_FontWiperReplacementProcedure_3
5. Install a new wiper blade assembly in
the reverse order of removal.
6. Gently put the wipers back down onto
the windshield.
7. With the Engine Start/Stop button in
the ON position, turn the wiper switch to
any ON position to return the wipers to
the bottom resting position.
9-34
Type B
2. Lift the wipers off the windshield.
3. Lift up the wiper blade clip (1). Then pull
down the wiper blade (2). Remove the
wiper blade from the wiper arm.
2C_FontWiperReplacementProcedure_5
4. Install a new wiper blade assembly in
the reverse order of removal.
2C_FontWiperReplacementProcedure_6
5. With the Engine Start/Stop button in
the ON position, turn the wiper switch to
any ON position to return the wipers to
the bottom resting position.
NOTICE
• Avoid the wipers from touching the
windshield when the wiper blade is
disassembled to prevent windshield
damage.
• The wiper may not operate for about 10
seconds if the wiper is operated
without washer fluid or the blades are
frozen to prevent damage to the motor.