Hyundai Kona Hybrid 2023 Owner's Manual page 426

Driver Assistance System
Display and Control
You can see the status of the Smart Cruise
Control operation in the Driving Assist
view on the cluster. Refer to "View
modes" section in chapter 4.
Smart Cruise Control will be displayed as
below depending on the status of the
function.
Operating
2C_SCCOperatingIndicatorInfo
Temporarily cancelled
2C_SCCTemporaryCancelIndicatorInfo
• When operating
(1) Whether there is a vehicle ahead and
the selected distance level
(2) Set speed
(3) Whether there is a vehicle ahead and
the target vehicle distance
• When temporarily cancelled
(1) Your vehicle (grey)
(2) Previous set speed (grey)
7-88
Information
• The distance of the front vehicle on the
cluster is displayed according to the
actual distance between your vehicle
and the vehicle ahead.
• The target distance may vary according
to the vehicle speed and the set
distance level. If the vehicle speed is
low, even though the vehicle distance
have changed, the change of the target
vehicle distance may be small.
• The images and colors in the
instrument cluster may differ
depending on the cluster type or theme
selected from the settings menu.
Accelerating temporarily
2C_SCCAcceleratingTemporarilyInfo
If you want to speed up temporarily
without altering the set speed while
Smart Cruise Control is operating,
depress the accelerator pedal. While the
accelerator pedal is depressed, the set
speed, distance level and target distance
will blink on the cluster.
However, if the accelerator pedal is
depressed insufficiently, the vehicle may
decelerate.
WARNING
Be careful when accelerating temporarily,
because the speed and distance is not
controlled automatically even if there is a
vehicle in front of you.