Preparing Software Update; Updating Software - Hyundai Kona Hybrid 2023 Owner's Manual

Preparing software update

If you press the 'Start' button on the
screen, the vehicle begins installing the
update automatically. The following
conditions must be satisfied:
• The vehicle must be off.
• The gear must be in P (Park).
• The Electronic Parking Brake (EPB)
must be applied.
• The exterior lights must be turned off.
• The hood must be closed.
• The battery must be sufficient.
• The systems to be updated must not be
running.
Information
The battery and system status are
automatically checked by the vehicle.
2C_OTAUpdatePreparing
• To update immediately, press 'Update
Now'.
• To cancel the update, press 'Cancel
Update'.

Updating software

2C_OTAUpdate
You can see the progress of the update on
the screen.
After the update is complete, you
receives a notification on your phone or
the vehicle screen that the software
update is complete.
Information
The screen turns off automatically after 3
minutes to save the battery. If the screen
turns off automatically, you can check the
update progress by pressing the Engine
Start/Stop button.
Information
• After the update starts, you can exit the
vehicle.
• The OTA software update feature is
only available for HYUNDAI Connected
Services users.
• The update details may vary depending
on the installed software version.
• Check the notice for the OTA software
update on the HYUNDAI brand web.
• If the update fails, the update recovery
will automatically proceed. If you want
to retry the software update, even after
a successful recovery, we recommend
that you contact HYUNDAI.
• If the update or recovery fails, we
recommend that you contact HYUNDAI
Call Center.
5
5-61