Remote Smart Parking Assist Settings - Hyundai Kona Hybrid 2023 Owner's Manual

Driver Assistance System
CAUTION
Take the following precautions to
maintain optimal performance of the
detecting sensors:
• Never disassemble the detecting
sensor or sensor assembly, or cause
any damage to it.
• If the detecting sensors need repair, we
recommend that your vehicle be
inspected by an authorized HYUNDAI
dealer
• Remote Smart Parking Assist may
malfunction if the vehicle bumper
height or ultrasonic sensor installation
has been modified or damaged. Any
non-factory installed equipment or
accessories may also interfere with the
sensor performance.
• When the ultrasonic sensor is frozen or
stained with snow, dirt, or water, the
sensor may not operate until the stains
are removed using a soft cloth.
• Do not push, scratch, or strike the
ultrasonic sensor. Sensor damage
could occur.
• Do not spray the ultrasonic sensors or
its surrounding area directly with a high
pressure washer.
7-150
Remote Smart Parking Assist
settings
Warning Methods
2C_WarningTypeSetInfo
The Warning Methods can be set with the
vehicle on.
• Warning Volume: Select Settings >
Vehicle > Driver Assistance > Warning
Methods > Warning Volume from the
settings menu in the infotainment
system to change the warning volume.
Even if you set the warning volume to
'0', the warning sound will sound at the
volume set to '1' (if equipped).
Information
• If you change the Warning Methods,
the Warning Methods of other Driver
Assistance systems may change.
• If the vehicle is restarted, Warning
Methods will maintain the last setting.
• The setting menu may not exist based
on vehicle specification.