Changing Tires - Hyundai Kona Hybrid 2023 Owner's Manual

Table of Contents

Advertisement

Changing tires

WARNING
Because the vehicle may slip or roll off of
a jack causing serious injury or death, take
the following safety precautions:
• NEVER place any portion of your body
under the vehicle that is supported by a
jack.
• NEVER attempt to change a tire in the
lane of traffic. ALWAYS move the
vehicle completely off the road on a
level, firm ground away from traffic
before trying to change a tire. If you
cannot find a level, firm place off the
road, call a towing service for
assistance.
• ONLY use the jack provided with the
vehicle.
• ALWAYS place the jack on the
designated jacking positions on the
vehicle and NEVER on the bumpers or
any other part of the vehicle for jacking
support.
• Do not start or run the engine while the
vehicle is on the jack.
• Do not allow anyone to remain in the
vehicle while it is on the jack.
• Keep children away from the road and
the vehicle.
Keep the following steps to change your
vehicle's tire:
1. Park on a level, firm surface.
2. Shift the gear to P (Park), apply the
parking brake, and move the Engine
Start/Stop button to the OFF position.
3. Press the hazard warning flasher
button.
4. Remove the wheel lug wrench, jack,
jack handle, and spare tire from the
vehicle.
5. Block both the front and rear of the tire
diagonally opposite of the tire you are
changing.
2C_SpareTireReplacementPrecedure_3
[A] Block
6. Loosen the wheel nuts
counterclockwise one turn each in the
order shown below, but do not remove
any wheel nuts until the tire has been
raised off of the ground.
2C_SpareTireReplacementPrecedure_4
8
8-21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents