Auto Defogging System - Hyundai Kona Hybrid 2023 Owner's Manual

Auto defogging system

if equipped
2C_RainSensor
The Auto defogging reduces the
possibility of fogging up the inside of the
windshield by automatically sensing the
moisture on inside the windshield.
The auto defogging system operates
when the heater or air conditioning is on.
Information
The Auto defogging system may not
operate normally, when the outside
temperature is below -10 °C (14 °F).
When the Auto Defogging System
operates, the indicator illuminates.
If high amount of humidity is detected in
the vehicle, the Auto defogging system is
enabled.
The following steps are performed
automatically:
Step 1. Air conditioning turns on and
Outside (fresh) mode is selected.
Step 2. Defrost level is selected.
Step 3. Fan speed is set to the highest
level.
If the air conditioning is off or recirculated
air is manually selected while Auto
defogging system is ON, the Auto
defogging system
signal that manual operation has been
canceled.
indicator blinks to
Turning the Auto defogging system
on or off
Climate control system
Press the front windshield defroster
button for 3 seconds when the Engine
Start/Stop button is in the ON position.
When the Auto defogging system is
turned off, the
times and ADS OFF appears on the
climate control information screen.
When the Auto Defogging system is
turned on, the
times without a signal.
Infotainment system
Auto Defogging System can be turned on
and off by selecting Settings > Vehicle >
Climate > Defog/Defrost Options > Auto
Defog from the infotainment system.
Information
• Do not select recirculated air while the
Auto defogging system is operating.
• When Auto defogging system is
operating, fan speed adjustment,
temperature adjustment, and air intake
control selection are all disabled.
NOTICE
Do not remove the sensor cover located
on the top of the windshield glass.
Damage may not be covered by your
vehicle warranty.
5
symbol blinks 3
symbol blinks 6
5-95