Washer Fluid; Checking The Washer Fluid Level; Hybrid Starter & Generator (Hsg) Belt; Checking The Hybrid Starter & Generator (Hsg) Belt - Hyundai Kona Hybrid 2023 Owner's Manual

Maintenance

Washer fluid

Checking the washer fluid
level
2C_WasherFluid
Check the fluid level in the washer fluid
reservoir and add fluid if necessary. Plain
water can be used during summer
months if washer fluid is not available.
However, use washer fluid with antifreeze
in cold climates to prevent freezing.
WARNING
To prevent serious injury or death:
• Do not use engine coolant or antifreeze
in the washer fluid reservoir. Engine
coolant can severely limit your visibility
when sprayed on the windshield and
may cause loss of vehicle control
resulting in a collision.
• Do not allow sparks or flame to contact
the washer fluid or the washer fluid
reservoir. Washer fluid may contain
alcohol and can be flammable.
• Do not drink washer fluid and avoid
contact with skin.
9-30
Hybrid starter &
Generator (HSG) belt
Checking the Hybrid Starter &
Generator (HSG) belt
We recommend that you have the Hybrid
Starter & Generator (HSG) belt inspected
or replaced according to the Maintenance
Schedule in this chapter by an authorized
HYUNDAI dealer.
CAUTION
When the HSG belt is worn out or
damaged, replace the belt.
Otherwise, it may cause engine
overheating or battery discharge.
Information
• Turn the engine off while you inspect
the engine or Hybrid Starter &
Generator (HSG) belt. Otherwise it may
result in serious injury.
• Keep hands, clothing etc. away from
the Hybrid Starter & Generator (HSG)
belt.