Forward/Side/Reverse Parking Distance Warning (Pdw) - Hyundai Kona Hybrid 2023 Owner's Manual

Driver Assistance System
• The following objects may not be
detected:
- Sharp or slim objects, such as ropes,
chains or small poles.
- Narrow objects, such as corners of a
square column
- Objects, which tend to absorb sensor
frequency, such as clothes, spongy
material or snow.
- Objects smaller than 100 cm (40
inches) in length and narrower than
14 cm (6 inches) in diameter.
- Pedestrians, animals or objects that
are very close to the ultrasonic
sensors
WARNING
• Parking Distance Warning is a
supplemental function. The operation
of Parking Distance Warning can be
affected by several factors (including
environmental conditions). It is the
responsibility of the driver to always
check the front and rear views before
and while parking.
• Your new vehicle warranty does not
cover any accidents or damage to the
vehicle due to the malfunction of
Parking Distance Warning.
• Pay close attention when driving near
objects, pedestrians, and especially
children. Some objects may not be
detected by the ultrasonic sensors, due
to the objects distance, size or material,
all of which can limit the effectiveness
of the sensor.
• Parking Distance Warning does not
warn you in the order of detection. It
varies depending on the speed of the
vehicle or the shape of a person,
animal, or object.
• If the Parking Distance Warning does
not operate properly, we recommend
that your vehicle be inspected by an
authorized HYUNDAI dealer.
7-136
Forward/Side/Reverse
Parking Distance Warning
(PDW)
if equipped
Forward/Side/Reverse Parking Distance
Warning uses the front, side, and rear
ultrasonic sensors to detect and warns
you if a person, animal, or object is within
a certain distance when your vehicle is
stopped or driving at low speed.
Detecting sensor
2C_WideFrontUltrasonicSensor
2C_WideRearUltrasonicSensor
[A] Front ultrasonic sensors
[B] Front side ultrasonic sensors
[C] Rear side ultrasonic sensors
[D] Rear ultrasonic sensors
See the illustration above for the detailed
location of the detecting sensors.