Connect Slave Monitor / Vdr - JRC JMA-5312-6HS Installation Manual

3.18

CONNECT SLAVE MONITOR / VDR

Install the slave monitor /VDR cable (CFQ-8914) in the radar process unit according to the procedures
below:
(1) Remove the radar process unit cabinet cover, loosen the screws that mount the terminal board to the
cabinet, and remove the terminal board from the radar process unit cabinet.
(2) Connect CFQ-8914 to J4406 on CDC-1332 as shown in upper photograph.
All manuals and user guides at all-guides.com
3-36
3