JRC JMA-5312-6HS Installation Manual page 66

All manuals and user guides at all-guides.com
(2) Pull out the D-sub connector from radar process unit as shown in the following photograph.
When JRC's VDR is used, by connecting it to TB4303(13,14)ARPATX± of terminal board circuit
CDC-1397A located in the display unit (radar process unit), it is possible to use the online maintenance
function.
Setting of display unit.
1) Press and hold [RADAR MENU] key.
The Code Input menu will appear.
2) Press the [0] key, and put the cursor on the
The Serviceman Menu will appear.
3) Open the Remote Maintenance menu by performing the following menu operation.
2. Installation Menu
→ 5. COM Port Setting
4) Select the send port.
3. ARPA .
ENT button, and press the [ENT] key.
→ 4. TX Port
→ 9. Next
→ 5. Remote Maintenance
3-37