Zodiac Z550iQ Quick Start Manual page 20

4
User fonctions
Lock/Unlock
+
3 seconds
Adjust the temperature setpoint (enabled by default)
/
Press from the main
screen to adjust
the value
Activate/Deactivate the "Cooling" mode
Enabled by default,
automatically as soon as the water temperature
exceeds the setpoint temperature by more than 2°C.
Select the "Heating" modes (enabled by default)
The heat pump has 3 active operating modes for
adjusting its operating speed to the power that is
required and the mode that is selected :
• the "BOOST" mode
• the "SMART" mode
• the "ECOSILENCE" mode
20
Main screen
Set automatic lock (enabled by default)
/
Long press Until "P19"
/
Increase or decrease
temperature
the fonction activates
Refer to the online manual for further details about operating
modes and the LED strip behaviour.
0 (disabled) ou
Confirm
1 (enabled)
Confirm (automatic if
more than 3 seconds
of inactivity)
Long press from the
main screen:
The screen displays
"COOL"
Press from the main
screen:
The indicator stops
in front of one of the
3 modes
❷ Use
/
Confirm
Recommended
temperature: 28 °C
Max temperature: 32°
Press to
activate/deactivate
The screen displays
"ON" or "OFF"
Press until reaching the
desired mode