Pan & Tilt Adjustments - Eneo SPD-62V2810P0A Quick Installation Manual

Detach the dome camera from the Easy Adaptor
Push the hook on the dome base and swing the dome base to counterclock wise. Then
detach the dome camera from the installed Easy Adaptor.
2
1
Open the dome cover
Put the driver in the dome cover gap and get down until the dome cover open.
1
Pan & Tilt adjustments
1. Pan limit: Pan is limited to +/- 175°. Do NOT force to rotate the gimbal over the
limit to prevent from the internal damage.
2. Tilt limit: Tilt is limited to 25° min ~ 90° max. with reference to the ceiling when
the inclination of camera module is 0°, that is, the image is aligned horizontally.
3. Inclination limit (Horizontal image alignment): Inclination limited to +/- 175° max.
6
3
2