Power Supply Connections - Eneo SPD-62V2810P0A Quick Installation Manual

CAUTION:
Extreme care should be taken NOT to scratch the bubble dome
surface while the camera installing or adjusting.
Extreme care should be taken NOT to apply force to IR LEDs.
Care should be taken the cable is NOT to be damaged, kinked or
exposed in the hazardous area.
Do not expose the camera directly to a strong light source such
as the sun or spot light..

Power supply connections

Camera can be operated with the regulated or unregulated 12VDC but the regulated
power supply of 12VDC is recommended. Camera is protected from the damage by the
reverse connection of polarity..
i In case that HD-SDI/EX-SDI Inputs are not supported in monitor, please use HD-SDI/
EX-SDI Converter to connect HD-SDI/EX-SDI cable with monitor. Some computer moni-
tors or TVs may not support 30p/25p. In this case, HD-SDI/EX-SDI DVR which can convert
the frame rate to 60p/50p is highly recommended. Please check specification of monitor
before installation.
8
VIDEO (BNC)
Power