Pan & Tilt Adjustments - Eneo ICB-62M2713MAA Quick Installation Manual

10. Set the camera's orientation and tighten the Lock/Unlock screws using hex
wrench.
11. Open the Opening cover to insert the Micro SD memory.
12. After all the setting, close the Opening cover and tighten it.
13. Put the sunshield to the camera unit and tighten the sunshield bolts..
CAUTION:
Extreme care should be taken NOT to scratch the window in front
of lens. Care should be taken the cable is NOT to be damaged,
kinked or exposed in the hazardous area. Do not expose the
camera directly to a strong light source such as the sun or spot
light.
Pan & Tilt adjustments
• Unlock the screw on the camera bracket through using the torque wrench supplied
• Set the camera's viewing angle then lock the screw on the bracket.
1. Pan limit: Pan is limited to +/- 90°.
12
Hex wrench
Adjustment of viewing angle with a bracket