Button; Normal Mode - AEMC 603 User Manual

Clamp-on meter

Table of Contents

2.4

BUTTON

2.4.1

This button activates the detection of the MAX and MIN values of the

measurements made. Max and Min are the extreme mean values in DC and the

extreme RMS values in AC.

NOTE: In this mode, the Auto Power Off function of the device is automatically

disabled. The

Successive presses on

short

long (> 2 sec)

NOTE : ΔREL function can be used with the functions of the MAX/MIN mode.

symbol is displayed on the screen.

Function

First press: Activates detection of the

MAX/MIN values

Second press: Displays the MAX or MIN

value successively

Third press: Returns to the display of the

present measurement without exiting from

the mode (the values already detected are

not erased)

NOTE: The MAX and MIN symbols are

both displayed, but only the symbol of the

measurement selected blinks.

Example: If MIN has been selected, MIN

blinks and MAX is lit steadily.

- Exits the MAX/MIN mode. The values

previously recorded are then erased.

NOTE: If the HOLD function is activated,

it is not possible to exit from the MAX/MIN

mode. The HOLD function must first be

disabled first.

Table of Contents