TOHATSU M 2.5A 2 Owner's Manual page 32

32
ENGINE OPERATION
1. Lower the throttle lever in order to
the slow position.
1. Throttle lever
2. Fully closed
2. Put the shift lever in the Neutral posi-
tion. (3.5B2 only)
Run the engine for 2-3 minutes at
idling speed for cooling down if it has
been running at full speed.
3. Push the stop switch.
7
1. Stop switch
2. Stop switch lock
4. Close the air vent screw and fuel
cock.
2
1
1
2
ENOF02026-0
1
2
ENOF02027-0
ENOF02030-A
1. Fuel cock
2. Air vent screw
Emergency engine stopping
Remove stop switch lock to stop the
engine.
1. Stop switch
2. Stop switch lock
ENOM00910-1
Spare emergency stop switch lock
(For CE marking model)
A spare emergency stop switch lock is
provided in the accessories bag.
Make sure that spare stop switch lock is
available before operating outboard
motor.
When used as described, the emergency
stop switch clip and emergency stop
switch lanyard system stops the engine if
the operator is thrown overboard. When
an operator falls into water, be sure to
use spare emergency stop switch lock.
1
2
ENOF02029-0
ENOF00891-0