Table of Contents
Advertisement
28
ENGINE OPERATION
5. Pull the starter handle slowly until you
feel engagement, keep pulling till you
feel less resistance. Then pull it
quickly. Repeat the procedure until
the outboard motor is started.
1. Slowly
2. Quickly
ENON00926-0
Note
7
Return the recoil starter grip slowly when
the engine has star ted. Releasing the
starter grip at the extended position may
cause a trouble in the starting system.
6. When the engine has started, imme-
diately return the choke lever to the
Open position then move the throttle
lever downward to slow speed.
1. Close
2. Open
2
1
ENOF02018-0
1
2
ENOF02017-0
7. Make sure that water is being dis-
charged from the cooling water check
port.
1. Cooling water check port
ENOM00042-1D
Emergency starting
ENOW00099-1A
WARNING
When the emergency starter rope is used for
starting engine;
Start in gear protection does not work. Be
sure to shift is at neutral position. Other-
wise the engine will move the boat imme-
diately and cause personal injury.
Be careful that your clothes or other
items do not get caught in the rotating
engine parts.
To prevent accident and injury by rotating
parts, do not re-install flywheel cover or
recoil starter, and the top cowl after the
engine has been started.
Do not pull starter rope if any bystander is
b e h i n d . T h e a c t i o n c a n i n j u r e t h e
bystander.
Attach engine stop switch lanyard to
clothing or any par t of body like arm
before starting engine.
1. Remove the top cowl fixing screws to
remove the top cowl.
1
ENOF02022-0
Advertisement
Table of Contents
