Toyota PRIUS 2023 Manual page 86

86
3-1. Using the Bluetooth
5
Touch the device to register
from the main area.
 The Bluetooth
be displayed instead of the
device name.
 Certain models of Bluetooth
devices may not be displayed
in the device list, unless a cer-
tain screen is displayed on
the Bluetooth
to the Bluetooth
instruction manual for details.
6
Check that the displayed PIN
code matches the PIN code
displayed on the Bluetooth
device, and then touch [OK].
 Some Bluetooth
may need to be operated to
complete registration.
 You may be prompted to
install the Toyota Application
on your phone. Please follow
the displayed instruction.
 Primary device settings may
be displayed. Perform the
operation according to the
screen guidance.
 Apple CarPlay settings may
be displayed. The Apple Car-
Play screen will be displayed
if use is enabled.
 Android Auto settings may be
displayed. The Android Auto
screen will be displayed if use
is enabled.
 A message indicating that
connection is complete is dis-
®
address may
®
®
device. Refer
®
device's
®
®
devices
®
function
played, and the name of the
registered Bluetooth
is displayed in the sub menu.
 If an operation failed screen is
displayed, follow the opera-
tion instructions on the
screen.
Registering from a
Bluetooth
If the Bluetooth
be found by searching with the
multimedia system, register by
searching for the multimedia
system from the Bluetooth
device.
1
Touch [
menu.
2
Touch [Bluetooth & Devices].
 If no device is registered, pro-
ceed to Procedure 4.
3
Touch [Add another device].
 While a device is connected
to the multimedia system, the
confirmation screen for dis-
connecting the device may be
displayed. Disconnect the
device to perform registration.
®
device
®
device
®
device cannot
®
] from the main