Toyota PRIUS 2023 Manual page 44

44
2-1. Multimedia system initial setup
trial in the Toyota app, the
subscription screen will be
displayed and you cannot use
the navigation system.
6
After registering your profile,
register your Bluetooth
device in order to identify the
driver. To continue with
setup, touch [Yes].
You can also register a device at a
later time.
● If a driver was not registered, reg-
istration can be restarted on the
driver list screen.
Automatically loading the
my settings
Taking a smart key, smartphone
or some other device in the
vehicle to identify the driver
enables the my settings to be
automatically loaded.
 The vehicle detects the
device registered in the my
settings when the vehicle is
started.
When a registered device is
detected, the profile that the device
is assigned to is automatically
loaded.
 If the device registered in the
my settings is not detected,
the vehicle is used in guest
driver mode.
 Touching [Settings] displays
the driver list screen enabling
®
you to change the my set-
tings. (P.49)
 You can select a smart key,
smartphone or some other
device as the device to iden-
tify the driver. (P.51)
● Only the Bluetooth
when the vehicle was last driven
are detected among the devices
assigned in the my settings. Driver
identification may be delayed or
may not be able to be performed
before starting the vehicle
depending on the usage condi-
tions of the Bluetooth
therefore recommended to regis-
ter a smart key in addition to
Bluetooth
Changing the my settings
You can select the my settings
that you want to use on the my
settings list registered on the
vehicle.
1
Touch [
menu.
®
devices used
®
device. It is
®
devices.
] on the main