198
8-1. Rear view monitor system
Things you should know
If you notice any symptoms
If you notice any of the following symptoms, refer to the likely cause
and the solution, and re-check.
If the symptom is not resolved by the solution, have the vehicle
inspected by your Toyota dealer.
Symptom
The image is difficult to
see
The image is blurry
Likely cause
The vehicle is in a dark
area
The temperature
around the lens is
either high or low
The outside tempera-
ture is low
There are water drop-
lets on the camera
It is raining or humid
Foreign matter (mud
etc.) is adhering to the
camera
Sunlight or headlights
are shining directly
into the camera
The vehicle is under
fluorescent lights,
sodium lights, mer-
cury lights etc.
Dirt or foreign matter
(such as water droplets,
snow, mud etc.) is
adhering to the camera.
Solution
Back up while visually
checking the vehicle's
surroundings. (Use the
monitor again once con-
ditions have been
improved.)
The procedure for
adjusting the picture
quality of the rear view
monitor system is the
same as the procedure
for adjusting the screen.
(P.56)
Flush the camera with a
large quantity of water
and wipe the camera
lens clean with a soft
and wet cloth.
Operate the dedicated
camera cleaning washer
and clean the camera
lens. For details, refer to
the separate "OWNER'S
MANUAL".