Toyota PRIUS 2023 Manual page 103

sion 14.3 or later.
● If wireless connection is set to be
used on the smartphone when
registered via USB connection,
the device can be wirelessly con-
nected on the next attempt.
Using Apple CarPlay with
wireless connection
Apple CarPlay can be con-
nected to the multimedia system
wirelessly using vehicle's wire-
less connection capability.
1
Enable Siri from your smart-
phone's settings menu.
2
Touch [ ] from the main
menu.
3
Touch [Bluetooth & Devices].
 The device search screen will
be displayed if there is no
smartphone registered to the
multimedia system. Proceed
to Procedure 5.
4
Touch [Add another device].
5
Touch [Search for devices].
6
Select the smartphone to
register.
7
Check that the displayed PIN
code matches the PIN code
displayed on the smart-
phone, and then touch [OK].
 Perform the operation accord-
ing to the guidance on the
screen.
8
If Apple CarPlay settings are
displayed, touch [Yes].
 The Apple CarPlay home
3-3. Using Apple CarPlay and Android Auto
screen is displayed.
 It may take around three to six
seconds to return to the origi-
nal screen, depending on the
smartphone being connected.
 If an operation failed screen is
displayed, follow the opera-
tion instructions on the
screen.
 If guidance is displayed on
the smartphone screen, follow
those operation instructions.
9
Operate Apple CarPlay.
 iPhone applications that sup-
port Apple CarPlay can be
used by touching the applica-
tion.
[ ]
Displays the multimedia system
screen.
To display the Apple CarPlay
home screen again, touch [
from the main menu.
[ ]/[ ]
Switch the screen display.
Touching and holding this will
start Siri.
● While Apple CarPlay is con-
103
3
]