Toyota PRIUS 2023 Manual page 180

180
6-8. How to use the message function
[Send message]: Voice control sys-
tem starts.
● When [Auto read messages] is
enabled, unread messages will be
read out starting with the oldest.
Checking new messages
When an SMS or MMS mes-
sage is received, a new mes-
sage notification is displayed at
the top of the screen.
1
The following operations can
be performed when a mes-
sage is received.
[ ]: Allows a reply to the mes-
sage. When a message is replied,
all of the messages from the same
sender will turn to already read.
[ ]: Reads the message aloud.
The read-out messages will turn to
already read.
Replying to messages
Reply to messages by selecting
the Intelligent Assistant, touch
[ ] or[ ], and saying "Send a
message" and follow voice
prompts. Also, reply to mes-
sages by using the hands-free
screen, follow those operation
instructions below.
1
Touch [ ] from the main
menu.
2
Touch [Messages].
3
Select the message sender.
 Chat is displayed.
4
Touch [Send message].
5
Enter a message using Intel-
ligent Assistant.
 Replies can be sent with tem-
plates using Intelligent Assis-
tant. (Quick reply)
 If there is a valid subscription
to the service
mand can be used to enter
the text of the email. (Tem-
plates can also be used to
reply.)
*
: This function is not made avail-
able in some countries or areas.
Sending new messages
New SMS messages can be
created. MMS is not supported.
1
Touch [ ] from the main
menu.
2
Touch [Messages].
*
, voice com-