Editing Contact Data; Transferring Contact Data - Toyota PRIUS 2023 Manual

Transferring contact

6-7.Editing contact data

data
Up to 5,000 contacts can be
registered for each con-
nected cellular phone. Only
the contacts corresponding
to the connected cellular
phone can be displayed. In
the contacts, up to 4 phone
numbers can be registered
for each contact. Contacts
are managed for each con-
nected phone.
This function can be used
with cellular phones that
support automatic contact
data transfer (PBAP). Refer
to the included instruction
manual or compatible pro-
files for the connected cellu-
lar phone, to determine
whether it supports auto-
matic contact data transfer
(PBAP). (P.84)
To transfer contacts with
automatic contact data
transfer (PBAP), [Sync con-
tacts] must be set to on in
the Bluetooth
(P.77)
● When transferring contact data,
each data is subject to the follow-
ing restrictions.
• When five or more phone num-
bers are registered to a single
contact, all phone numbers will be
registered to the multimedia sys-
tem as multiple contacts with the
®
settings.

6-7. Editing contact data

same name.
• The name is transferred at the
same time as the phone number.
Depending on the model, some
letters, such as symbols, or all let-
ters may not be transferred. Fur-
thermore, even if they are
transferred they may not be dis-
played correctly.
• Typically, secret memory is not
read. (It is possible in some cases,
depending on cellular phone
specifications)
• The group names registered to
the cellular phone are not trans-
ferred.
• The phone number type shown in
contacts on the multimedia sys-
tem is automatically assigned
based on information from the
source device. However, depend-
ing on the model of cellular phone
and usage environment, the icons
may all be identical.
• Depending on the model of cellu-
lar phone, the cellular phone's pin
number and an authentication
password may need to be entered
when transferring contact data.
For details, refer to the included
instruction manual for the con-
nected cellular phone.
● Models of cellular phone that sup-
port batch transfer have the fol-
lowing characteristics when

transferring contact data.

• Transfer may take as long as 10
minutes.
• Even if the contact list transfer
screen is being displayed, it is
possible to switch to another
screen. In this case, contact list
transfer will continue.
● If the power switch is turned off
during contact list transfer, the
transfer will be canceled. In this
case, start the hybrid system and
carry out transfer operations
again.
● In the following cases, the contact
data being transferred is not
saved. (Some of the transferred
data is not saved either.)
177
6