Rear Panel (Dnr110 Series) - FLIR DNR110 Series Instruction Manual

5

Rear Panel (DNR110 Series)

1. MIC IN/OUT: RCA input and output for 2–way audio.
NOTE
Audio-enabled IP cameras (not included) are required to use audio recording. You cannot record
audio from the input (e.g. microphone) connected to the MIC IN port.
2. USB port(s): Connect a USB mouse (included) or USB thumb drive (not included) for
data backup or firmware updates.
3. HDMI: Connect to an HDMI monitor or TV (not included) to view the system interface.
4. VGA: Connect a VGA monitor (not included) to view the system interface.
5. LAN: Connect a CAT 5 RJ45 Ethernet cable for local and remote connectivity.
6. PoE Ports: Connect IP cameras. Integrated PoE (Power Over Ethernet) ports provide
power to cameras and video connection to NVR.
7. Power input: Connect the included power adapter.
#LX400068; r. 1.0/27398/27398; en-US
7