Configuring Snapshot Recording Settings - FLIR DNR110 Series Instruction Manual

14 Using the Main Menu
To configure audio recording:
1. From the Main Menu, click
2. Select the audio-enabled camera under Channel.
3. Check the Audio/Video checkbox to enable audio recording.
4. Click OK to save changes.

14.1.8 Configuring Snapshot Recording Settings

The system can be set to record snapshot images when a camera detects motion. These
snapshots can be viewed through the Search menu or can be attached to email alerts and
push notifications. The Snapshot tab in the Recording menu controls the quality and re-
cording parameters for each camera.
NOTE
In order to enable Snapshot recording, the following menu options must be configured:
• The Snapshot schedule must be enabled for times that you would like to save snapshots. See 14.3.15
Configuring the Snapshot Schedule, page 62.
• Snapshot recording must be enabled for motion detection in the Event menu. See 14.3.8 Configuring
Motion Detection, page 56.
To configure snapshot recording settings:
1. From the Main Menu, click
2. Under Snap Number, select the number of snapshots the system will take when the
snapshot button is pressed.
#LX400068; r. 1.0/27398/27398; en-US
and select Recording>Recording.
and select Recording>Snapshot.
45