36. Press a Shroud Connector (93) onto the Left
Lower Shroud (92).
Then, attach the Left Lower Shroud (92) to
the Base (1) and the Stabilizer (2) with two
M4 x 13mm Screws (94). Do not tighten the
Screws yet.
Repeat this step on the other side of the
weight system.
37. Press the Left Upper Shroud (90) into the
Shroud Connector (93).
Then, attach the Left Upper Shroud (90) to the
Top Frame (4) with an M4 x 13mm Screw (94).
Do not tighten the Screw yet.
Repeat this step on the other side of the
weight system.
36
1
37
90
4
94
23
93
92
2
94
93
94