ICON PRO-FORM SPORT POWER STACK XT User Manual page 11

6. Attach the Front Leg (7) to the Base (1) and to
the Front Base (78) with two M8 x 20mm Screws
(84). Do not tighten the Screws yet.
Next, hold the Leg Bumper (60) against the Front
Leg (7); orient the Leg Bumper so that the
indicated end (C) is pointing upward. Attach
the Leg Bumper with an M4 x 25mm Self-tapping
Screw (85).
7. Attach the Seat Frame (6) to the Lower Upright
(20) with two M8 x 65mm Bolts (68), two M8
Washers (59), and two M8 Locknuts (58). Do
not tighten the Locknuts yet.
Attach the Seat Frame (6) to the Front Leg (7)
in the same way.
6
C
85
60
84
78
7
68
6
59
58
59
11
7
84
1
68
59
68
59
68
20
7
58