Menu Map - Chauvet DJ ILS COMMAND User Manual

Menu Map

Refer to the ILS Command product page on
Main Level Programming Levels
DFI Channel
Back Light
Sound In
Sound Lost
Par Color
Program
Mode
Spots
Par
Laser
Effect Type
Strobe effect
Derby
Blinder
Strobe
Presets
Chase Play
Power Lost
Laser Mode
USB Backup/
Restore
This will permanently erase
all data. To continue, hold
Factory reset
BLACKOUT and PRESET4
System
Update
7
www.chauvetdj.com
Description
1–16 Selects a D-Fi channel to transmit ILS
6–100 Sets the level of the button back lights
MIC Uses the built-in microphone for sound input
AUX Uses the 3.5 mm audio in for sound input
HOLD Holds last instruction when no sound input
FREEZE Freezes on current output when no sound input
BLACK Blacks out all connected products when no sound input
Tri Sets par control to tri-color RGB
Sets par control to quad-color RGBA (RGBW also
Quad
works)
Hex Sets par control to hex-color RGBAWUV
SNAP Programs snap between colors
FADE Programs fade between colors
ON
Enables or disables selected effect types
OFF
GO BACK Returns to main level
MOMENTARY Flashes blinders while <BLINDER> is pressed
LATCH Pressing <BLINDER> toggles blinders on and off
MOMENTARY Products strobe while <MASTER STROBE> is pressed
Pressing <MASTER STROBE> toggles strobing on and
LATCH
off
Static Selected preset continues until manually stopped
1–20mintue Cycle through saved presets
BLACKOUT All products black out on ILS Command power loss
All products continue last instruction on ILS Command
LAST SET
power loss
AUTO All products switch to auto on ILS Command power loss
OFF Disables lasers
EU Maintains EU laser standards
US Maintains US laser standards
Backup Backs up presets and settings data via USB port
Restore Restores presets and settings data via USB port
WARNING!
Resets the ILS Command to factory defaults
for 5 seconds
CANCEL
NO
Updates the ILS Command firmware via the USB port
YES
for the latest menu map.
ILS Command User Manual Rev. 1
Operation