Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Chauvet DJ Kinta HP
Summary of Contents for Chauvet DJ Kinta HP
- Page 1 User Manual...
-
Page 2: Table Of Contents
Auto-Program Speed....................Sound-Active Mode ....................Sound Sensitivity..................... Preset Color Mode ....................IRC-6 Infrared Remote Control ..............IRC-6 Operation ...................... Master/Slave Mode ..................5. Maintenance................Product Maintenance ..................6. Technical Specifications ............Returns.................... Contact Us ..................Kinta HP User Manual Rev. 1... -
Page 3: Before You Begin
Electronically published by Chauvet in the United States of America. CHAUVET, the Chauvet logo, and Kinta HP are registered trademarks or trademarks of Chauvet & Sons LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other company and product names and logos referred to herein may be trademarks of their respective companies. -
Page 4: Safety Notes
Keep this User Manual for future use. If the product is sold to someone else, be sure that they also receive this document. Page 2 of 13 Kinta HP User Manual Rev. 1... -
Page 5: Introduction
IR sensor LED display Power out Menu buttons Fuse holder Microphone Safety cable pass-through Power in Product Dimensions 9.4 in 240 mm 9 in 8.7 in 230 mm 220 mm Kinta HP User Manual Rev. 1 Page 3 of 13... -
Page 6: Setup
3. Setup AC Power The Kinta HP has an auto-ranging power supply and it can work with an input voltage range of 100 to 240 VAC, 50/60 Hz. To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart. -
Page 7: Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes. Orientation The Kinta HP may be mounted in any position; however, make sure adequate ventilation is provided around the product. Rigging • Before deciding on a location, always make sure there is easy access to the product for maintenance and programming. -
Page 8: Operation
Sound sensitivity Infrared Turns infrared on or off Configuration (DMX) The Kinta HP works with a DMX controller. Information about DMX is in the CHAUVET DMX Primer, which is available from the Chauvet website http://www.chauvetlighting.com/downloads/ DMX_Primer_rev05_WO.pdf. Starting Address and Personality When selecting a starting DMX address, always consider the number of DMX channels the selected DMX mode uses. -
Page 9: Dmx Channel Assignments And Values
(when Ch. 1 is 001 250) Sound sensitivity 000 255 Sound sensitivity, low to high (when Ch. 1 is 251 255) No function Motor rotation 001 255 Motor speed, slow to fast Kinta HP User Manual Rev. 1 Page 7 of 13... -
Page 10: Configuration (Standalone)
Press <ENTER>. IRC-6 Infrared Remote Control The Kinta HP is compatible with the IRC-6 infrared remote control from Chauvet. To run the Kinta HP in IR mode, follow the instructions below. 1. Press <MENU> repeatedly until SEt shows on the display. -
Page 11: Irc-6 Operation
Master/Slave Mode The Master/Slave mode allows a single Kinta HP product (the “master”) to control the actions of one or more Kinta HP products (the “slaves”) without the need of a DMX controller. The master product will be set to operate in either standalone mode or with the IRC-6, while the slave products will be set to operate in slave mode. -
Page 12: Maintenance
7. Gently polish the transparent surfaces until they are free of haze and lint. Always dry the transparent surfaces carefully after cleaning them. Do not spin the cooling fans using compressed air because it they could be damaged. Page 10 of 13 Kinta HP User Manual Rev. 1... -
Page 13: Technical Specifications
Maximum External Temperature Cooling System 104 °F (40 °C) Convection I/O Connector Channel Range 3-pin XLR 3 or 12 Ordering Product Name Item Code UPC Number Kinta HP 07051794 781462221423 Kinta HP User Manual Rev. 1 Page 11 of 13... -
Page 14: Returns
Be sure to pack the product properly. Any shipping damage resulting from inadequate packaging will be your responsibility. FedEx packing or double-boxing are recommended. Chauvet reserves the right to use its own discretion to repair or replace returned product(s). Page 12 of 13 Kinta HP User Manual Rev. 1... -
Page 15: Contact Us
Visit the applicable website above to verify our contact information and instructions to request support. Outside the U.S., U.K., Ireland, Mexico, France, Germany, or Benelux, contact the dealer of record. Kinta HP User Manual Rev. 1 Page 13 of 13...