Laser Mode; Usb Backup Or Restore; Factory Reset; System Update - Chauvet DJ ILS COMMAND User Manual

Laser Mode

To set connected lasers to US standards, EU standards, or to disable them completely, do the following:
1. Press the <X> encoder to access the menu.
2. Turn the <X> encoder left or right to select Laser Mode.
3. Press the <X> encoder.
4. Turn the <X> encoder left or right to select from OFF (disables lasers), EU (maintains European
Union standards), or US (maintains United States standards).
5. Press the <X> encoder.

USB Backup or Restore

To backup or restore data via the USB type A port, follow the instructions below.
1. Plug a USB drive into the USB type A port.
2. Press the <X> encoder to access the menu.
3. Turn the <X> encoder left or right to select USB Backup/Restore.
4. Press the <X> encoder.
5. Turn the <X> encoder left or right to select from Backup (backup file will upload via USB) or
Restore (existing backup file will download via USB).
6. Press the <X> encoder.

Factory Reset

To reset the ILS Command to factory default settings, do the following:
1. Press the <X> encoder to access the menu.
2. Turn the <X> encoder left or right to select Factory reset.
3. Press the <X> encoder.
4. Press and hold <BLACKOUT> and <PRESET 4> for 5 seconds to reset, or to cancel, turn the <X>
encoder to select CANCEL and press the <X> encoder.

System Update

To update the ILS Command via the USB type A port, follow the instructions below.
1. Download the latest firmware update for the ILS Command from
the file on a USB drive.
2. Press the <X> encoder to access the menu.
3. Turn the <X> encoder left or right to select System Update.
4. Press the <X> encoder.
5. Turn the <X> encoder left or right to select from NO or YES.
6. Press the <X> encoder. The product will reset and enter upload mode.
7. Plug the USB drive with the firmware update file into the USB type A port. The ILS Command will
automatically find the firmware update file and apply it.
8. The ILS Command will reset automatically. The new firmware version will show on the display
during startup.
9. When the ILS Command has finished restarting, it is safe to remove the USB drive.
11
Operation
www.chauvetdj.com and place
ILS Command User Manual Rev. 1