Hollyland LARK MAX User Manual page 23

Operation Instructions
Pairing
The transmitter and the receiver are paired by default. Follow either of the following
two ways to pair the transmitter and the receiver if they are disconnected.
1. Auto pairing: Place the transmitter and the receiver in the charging case, and
they will pair automatically. (Figure 1)
2. Manual pairing: Turn on the transmitter and the receiver, and press and hold
the pairing button on the transmitter to enter pairing mode. In this case, the
transmitter status indicator light flashes quickly. Then, select System Settings
on the receiver touchscreen and tap Pairing to start pairing. If the transmitter
status indicator light turns steady blue, pairing is successful. (Figure 2)
Figure 1
EN-23
Figure 2