Loop Playback; Using The Quick Loop Function To Set The Loop Region - Roland VariOS User Manual

Loop playback

You can use loop playback to listen repeatedly to a specific region.
1. In the locator, turn on the loop button.
fig.03-37
2. The loop markers will be displayed in the time ruler.
fig.03-38_75
3. Drag the loop markers to left or right to specify the start point and end point of the loop.
4. Press the play button, and playback will loop between the loop markers.

Using the Quick Loop function to set the loop region

The Quick Loop function sets the selected region as the loop region.
Select a frame in the Vari Track, and click the Quick Loop Position button in the locator. The beginning
and end of the frame will be set as the loop region. If you drag over the time ruler to select a region
and then click the Quick Loop Position button, that region will be set as the loop region.
fig.03-39
Creating a song (Vari Track)
73