Select the Recording Source
Use Wave Source Selector (Source Select: red) to select the wave source for
recording. For this example, select MIC1/GTR.
fig.03-09e
Prepare for Recording
Prepare to record the input source into the sequencing software. On the sequencing
software, select the recording track, set the port, and adjust the audio input level.
If you are using Cakewalk, select Audio Options from the Tools menu. In the dialog
box that appears, click the Advanced tab, and check Enable Simultaneous Record/
Playback in the playback and recording section.
fig.cw-toole
Monitoring the Audio Data While You Record a New Part
For details on recording
preparations for each type
of input source, refer to
"Recording Vocals" (p.
20), "Recording Guitar"
(p. 24), and "Recording
from an Audio Device"
(p. 28), as well as to the
manual for your
sequencing software.
33