Roland Audio Canvas UA-100 User Manual page 44

Monitoring the Effect Sound While You Record the Unprocessed (Dry) Sound
Prepare for Recording
Prepare for recording the input source into your sequencing software. On your
sequencing software, select the track for recording, set the port, and adjust the audio
input level.
Record and Playback
Rewind to the beginning of the song, and begin recording. When you finish recording,
stop.
Rewind to the beginning of the song, and play it back to hear the data you recorded.
Verify that the sound unprocessed by the effect (i.e., the dry sound) was recorded on
the track.
44
For preparations to record
various input source, refer
to "Recording Vocals"
(p. 20), "Recording
Guitar" (p. 24), and
"Recording from an
Audio Device" (p. 28), as
well as to the manual for
your sequencing software.