Front Panel - Roland Audio Canvas UA-100 User Manual

Front Panel

fig.UA-100Gfront_70
Mic 1/ Guitar Input Jack
A microphone or guitar can be connected to this jack.
Mic 2 Input Jack
A microphone can be connected to this jack.
Dynamic microphones are the only type of microphone that can be connected to
the Mic 1/Guitar Input Jack and the Mic 2 Input Jack. The miniature
microphones (condenser microphones) that may be included with your
computer cannot be used.
Input Level/Peak Indicator
This indicator will light in green when there is an input signal from the Mic 1/
Guitar Input Jack, the Mic 2 Input Jack, or the rear panel Line Input Jacks. If the
input level is too high, the indicator will light in red.
Mic 1/Guitar Input Volume
This knob adjusts the input level of the microphone or guitar that is connected
to the Mic 1/Guitar Input Jack. Rotating it counterclockwise will decrease the
input level, and rotating it clockwise will increase the input level. By pressing
this knob, you can switch between the microphone input and guitar input.
Mic 1/Guitar Function Indicator
This indicator shows whether the Mic 1/Guitar Input Jack is being used for a
microphone or for a guitar. Each time you press the Mic 1/Guitar Input Volume
Knob, the setting will alternate.
Lit: guitar
Extinguished: microphone
When the power is turned on, this will be lit (guitar)
Mic 2 Input Volume Knob
This adjusts the input level of the microphone that is connected to the Mic 2
Input Jack. Rotating it counterclockwise will decrease the input level, and
rotating it clockwise will increase the input level.
6