Roland Audio Canvas UA-100 User Manual page 57

Record MIDI Data
1
Start up your sequencing software.
2
On your sequencing software, specify the track that will be used for recording, and set
the source so that MIDI data can be recorded. With some sequencing software, the
tracks that allow audio data or MIDI data to be recorded may already be pre-
specified, making this step unnecessary.
3
As the MIDI port for the track to be recorded, select Roland UA-100 MIDI 1. For
details on selecting the MIDI port in your sequencing software, refer to the manual
that came with the software.
4
Begin recording, and play your MIDI keyboard.
5
When you finish your performance, stop recording.
Using the UA-100 as a MIDI Interface
57