Rear Panel - Roland Audio Canvas UA-100 User Manual

Rear Panel

fig.UA-100rear_70
AC Adaptor Jack
Connect the supplied AC adaptor to this jack.
Line Input Volume
This knob adjusts the audio input level from the Line Input Jacks. If the input
level exceeds the peak (i.e., if it is too loud), the front panel input level peak
indicator will light in red.
Line Input Jacks
Connect these jacks to your external MIDI sound module, or to the LINE OUT
of an audio device such as MD or DAT.
Line Output Jacks
Connect these jacks to your stereo or audio system.
Digital Output Connector
Connect an optical digital cable to this connector when you wish to digitally
output the audio signal to a digital recorder such as MD or DAT.
MIDI OUT 1/2 Connectors
Transmit MIDI messages to other MIDI devices.
MIDI IN 1/2 Connectors
Receive MIDI messages from other MIDI devices.
USB Connector
You can use a USB cable to connect this to your computer so that audio signals
and MIDI messages can be exchanged.
10