Recording Vocals - Roland Audio Canvas UA-100 User Manual

Recording Vocals

The UA-100 has two inputs to which a microphone can be connected, allowing you to
record vocals or acoustic instruments.
Here we will explain how to connect a microphone to the UA-100 and use your
sequencing software to record a vocal.
Connecting the Microphone
1
Before connecting a Microphone to the UA-100, lower the Mic 1/ Guitar Input
Volume level.
2
When connecting a microphone, make sure that the Mic 1/Guitar function indicator is
dark. If the Mic 1/Guitar indicator is lit, press the Mic 1/Guitar input knob.
fig.03-01e
3
Connect your microphone to the UA-100's Mic 1/Guitar Input Jack.
fig.03-02e
Depending on the location of the microphone and speakers, acoustic feedback (a high-
pitched squeal) may be heard. If this occurs, take the following steps.
1.
Change the direction of the microphone
2.
Move the microphone away from the speaker
3.
Lower the volume
20
If the Mic 1/Guitar Input
Volume is set for guitar
input when a mic is being
used, the audio level will
be too low.