Roland Audio Canvas UA-100 User Manual page 31

5
On your sequencing software, check that the audio input level is not exceeding the
maximum level. If it exceeds the maximum level, adjust the Wave output slider in the
UA-100 Controller Mixer window so that the level is as high as possible without
exceeding the maximum input level.
fig.03-12e**
Record
Rewind to the beginning of the song, and begin recording. When you finish recording,
stop. Rewind to the beginning of the song, and start playback to hear the recorded data.
Recording from an Audio Device
For details on how to
check the audio input
level of your sequencing
software, refer to the
manual for your
sequencing software.
31