Roland Audio Canvas UA-100 User Manual page 47

Make Effect Settings
While producing sound on the input source, set the Effect Type, parameter (Param),
and Value. Set the parameters while you apply the effect (in this example, the settings
of the Full Effects window will be used) to the audio data.
Prepare for Recording
Prepare for recording into your sequencing software. On your sequencing software,
select the track for recording, set the port, and adjust the audio input level.
If you are using Cakewalk, press the Arm button (R) for each track to turn it off for
tracks that will playback audio data, and turn it on (red) for the tracks that will record
this data. Also, go to the Tools menu, select Audio Options, click the Advanced tab
in the dialog box that appears, and check Enable Simultaneous Record/Playback in
the recording and playback section.
fig.cw-toole
Re-recording Audio Data While Applying an Effect
For details on effect
parameters, refer to
appendix "Effect
Parameters Chart" (p.
66). For details on making
effect settings, refer to the
UA-100 Controller Help
and to the Reference
Manual.
For details on
preparations for
recording, refer to the
manual for your
sequencing software.
47