About The Ua-100 Controller - Roland Audio Canvas UA-100 User Manual

About the UA-100 Controller

The UA-100 Controller is software that monitors the state of the UA-100 and is able to
control it.
* If the power switch is off, or if the USB connector is disconnected, the UA-100 Controller will
exit automatically. (Since the settings of the mixer window and effect window are saved
automatically when the program exits, these settings can be recovered by opening the windows
the next time the program is started up.)
Main window
When you start up the UA-100 Controller, the Main window will open first.
fig.02-03e.eps_50
This main window has the following functions.
• Effect Type Selector display
The current position (mode) of the Effect Type Selector knob will be shown as Mode in
the UA-100 Controller.
• Display buttons for the windows of the UA-100 Controller
When you click the following buttons, the corresponding window will open. The
windows that can be displayed will depend on the mode of the Effect Type Selector.
Button
Mixer
VT Mixer
Control Assign
Effect Assign
• UA-100 internal parameter settings
By selecting System setting from the Setting menu, you can set internal parameters
of the UA-100. For details refer to UA-100 Controller Help.
• Viewing the UA-100 Controller Help
From the Help menu, select UA-100 Controller Help to start up Help for the UA-100
Controller.
14
Mode
[PC], [VT], [VOCAL], [GUITAR], [GAME], [BYPASS]
[PC]
[VT], [VOCAL], [GUITAR], [GAME]
[VT], [VOCAL], [GUITAR], [GAME]