Recording Acoustic Instruments Or Vocals; Recording With The Internal Mics - Roland CD-2u Owner's Manual

Recording Acoustic Instruments or Vocals

Recording with the Internal Mics

ig.intmic-e.eps
The internal mics are stereo mics. Sound picked up
by the mic on the left side of the CD-2u/SD-2u is
recorded on the left channel (L), while sound from
the mic on the right side is recorded on the right
channel (R).
If You're Recording to an SD
Memory Card
1
Turn on the power
2
Insert the SD memory card
☞
( Page 26).
3
Set the audio source to "SD"
Press the [SD CARD] button so it's lit.
4
If you want to listen to the recorded audio while you record, connect
headphones to the PHONES jack located on the side of the CD-2u/SD-2u.
The sound received by the internal mics will not be heard from the internal speakers.
You'll need to use headphones if you want to monitor the sound being recorded. Use
the [VOLUME] knob to adjust the headphone volume.
fig.connect-headphone-e.eps
Type of plug that can
be connected
Stereo mini type
☞
( Page 22, 24).
fig.selectCD-e.eps
Internal mic
(left channel)
If You're Recording to a
CD-R/RW Disc
1
Turn on the power
2
Insert the CD
3
Set the audio source to "CD."
.
Press the [CD] button so it's lit.
Internal mic
(right channel)
☞
( Page 22).
☞
( Page 29).
fig.selectSD-e.eps
41