OPERATING THE DOOR
REMOVE PACKAGING
Check that the built-in stove is not damaged before installing it.
Scan 1003/1004 is delivered secured to the pallet. It is recommended that you remove the door and take all loose parts out of
the combustion chamber before unscrewing the stove from the pallet; this will facilitate the mounting of the insert.
Dismount the combustion air box. This box is only needed, if the insert is to be connected with external air supply, see page 19.
1
To remove the door:
Loosen the pointed screw,
remove the screw and the
spring and lift off the door
16
NAVN:
Combustion air box
Scan 1001
Push down the handle and the door will open
1
The door should be banged shut, as on a car.
2
Grip the handle (hold in a horizontal position)
and bang the door shut
Afmontage låge
EMNE:
Screw
and
spring
Pointed screw