Table of Contents
Advertisement
8. CAUTIONS
1) Put the cover off first and put on the breath pipe and air filter before running the
compressor(Fig.3)
2) Never unscrew any connecting part when the tank is in pressure condition.
3) Never disassemble any electrical part before disconnecting the plug.
4) Never adjust the safety valve carelessly.
5) Never use the compressor when voltage is too low or too high.
6) Never use electrical wire more than 5m long with less than the section shown in Table 1
7) Never disconnect the plug to stop compressor,set the switch knob in position off instead
8) If the outlet valve doesn't work as motor stopped,search for the cause immediately so as
not to damage the motor
9) Lubricating oil must be clean,oil level should be kept in the red circle leveler also
10) Disconnect the plug to cut off power supply and open the outlet valve.
Table 1
Motor output
(HP/kw)
1/0.75
1.5/1.1
2/1.5
2.5/2
220V/230V/240V Single-
phase
Wire(mm
)
Fuse(A)
2
1.5
16
1.5
16
1.5
16
2.0
20
100V/110V/127V Single-
phase
Wire(mm
)
Fuse(A)
2
2.0
2.5
2.5
2.5
8
20
20
20
20
Advertisement
Table of Contents
